Movable Electric Chair & Floor Lift with 4 Wheels | VOCIC AX35

The AX35 is a powered floor-to-seat lift designed to raise an individual from near floor level to a seated position during appropriate non-emergency fall recovery.

The maximum listed user weight is 352 lbs.

The seat lowers to approximately 2.7 inches above the supporting surface.

The maximum seat height is approximately 20 inches.

The seat travels approximately 17.3 inches between its lowest and highest positions.

A dual screw-rod motor system raises and lowers the seat in a balanced, controlled motion.

The dual screw-rod structure is designed to provide stable lifting with less shaking or side-to-side wobbling.

No. It is intended for non-emergency recovery when the person is alert, stable, and has no suspected serious injury.

Call for emergency assistance if the person has severe pain, bleeding, breathing difficulty, loss of consciousness, confusion, or a possible head, neck, back, or hip injury.

No. It is a floor-to-seat recovery device and does not provide sling-based transfers between beds, wheelchairs, toilets, or other surfaces.

The supplied information does not confirm independent operation. Whether self-use is appropriate depends on the controls, the user’s abilities, and the manufacturer’s instructions.

Yes. It includes an integrated four-wheel design with 4-inch rear wheels.

The chair is tilted to approximately 27 degrees, allowing the rear wheels to contact the floor for repositioning.

Do not move the chair with someone seated unless the manufacturer’s instructions expressly permit occupied transport. The wheels may be intended only for moving the equipment between uses.

No. It is not designed to replace a manual wheelchair, transport chair, or powered mobility device.

The supplied information lists approximately 35 to 36.5 lbs, depending on the specification source or configuration.

Its weight may be manageable for many caregivers, but lifting ability varies. Use safe body mechanics and assistance when necessary.

The seat is approximately 15 inches wide.

The seat measures approximately 16.1 inches deep.

The seating surface is made from Oxford cloth.

The frame combines carbon steel and aluminum alloy.

Yes. Some assembly is required, but the product is designed for straightforward setup without a professional technician.

The supplied information does not specify tool requirements. Follow the included instructions and use only the approved hardware.

Yes. Run it through a complete lifting cycle without a user and verify that all fasteners, supports, and electrical connections are secure.

The battery or electrical specifications were not included in the supplied information. Confirm the power source, charging method, and runtime before ordering.

Follow the manufacturer’s emergency-lowering or backup procedure. Do not use the chair until you understand how it responds to a power interruption.

Use it only on surfaces and in environments approved by the manufacturer. Uneven ground, slopes, moisture, gravel, and soft surfaces may affect stability.

Carpet compatibility is not specified. Thick or soft carpet may affect stability and wheel movement, so consult the manual before use.

No water-resistance rating was supplied. Do not expose the motor, controls, or electrical components to water unless the manufacturer expressly approves wet-area use.

No. Never operate or move the lift on stairs, escalators, or steep inclines.

A reclining function is not listed for the AX35.

It raises the user to a seated height of approximately 20 inches. Additional assistance or another device may be needed to stand safely.

At the raised position, the user may transfer to a compatible chair or stand with appropriate assistance. The exact method should follow the individual care plan.

Wipe the frame and seat using products approved by the manufacturer. Keep liquids away from the motor, controls, and electrical connections unless otherwise instructed.

Inspect the frame, seat, motors, controls, wheels, fasteners, wiring, and lifting mechanism. Do not use the chair if any part is damaged or loose.

The packed product weighs approximately 40 lbs.

The supplied package-size entry appears incomplete or incorrectly formatted. Confirm the shipping dimensions directly with the seller before ordering.

Its suitability depends on the assembled or folded dimensions, which were not provided. Measure the storage space and confirm the product dimensions first.

It can reduce the need for manual floor lifting, but it cannot eliminate injury risk. Caregivers should use proper techniques and follow the operating instructions.

No. The AX35 assists after an appropriate non-injury fall and does not prevent future falls.

Professional guidance is recommended for users with limited trunk control, pain, cognitive impairment, severe weakness, or complex transfer requirements.

Verify the user’s weight and seated dimensions, power and charging specifications, occupied-movement rules, overall dimensions, control method, warranty, and intended operating surfaces.